How to solve the warp problem in injection molding
Cause 1. The part is too hot when ejected from the mold Solution: Lower the plastic mold temperature; Lower the melt plastic temperature; Prelong the mold open time. Cause 2. The…
Cause 1. The part is too hot when ejected from the mold Solution: Lower the plastic mold temperature; Lower the melt plastic temperature; Prelong the mold open time. Cause 2. The…
PIM mould manufacturer ,focusing on injection mould and plastic molded products, is a qualified plastic products company incorporated with design, researching, producing, processing, and marketing all together. Our plastic goods are primarily segregated into Three sections, eletric, household and industry.…