mold components
Standard mold parts are used extensively in almost all modern injection mold tools. Only a…
-
Address: Mould City,Huangyan CN 318020
-
Phone: +86 159 6865 2523
-
Email: sales@plasticmoulds.net
Blog
gate land and gate diameter
The gate land should be as short as possible to achieve lower pressure for filling…
Gating Design Rules
The gate design should deliver a rapid, uniform and preferably Linidircctional mold-filling pattern,the gate location…
A gate is a small opening
A gate is a small opening (or orifice) through which the poly melt enters the…
Runner System Design Rules
Runners must be designed to fill the cavity rapidly, routine design must provide for easily…
Runner Cross-Section and Layout
The purpose of the runner is to transport the melt from the sprue to the…